VAPORESSO GTI Replacement Coils in Dubai UAE

GTI Replacement Product Overview

VAPORESSO GTi Replacement Coils are performance mesh coils built for dense, flavorful direct‑to‑lung (DTL) vaping with the iTank family. Designed to ramp fast and heat evenly, GTi Mesh delivers clean top notes, thick vapor, and dependable coil life across fruits, menthols, desserts, and tobaccos. If you run an iTank/iTank 2 on a GEN 80S/200, Target 80/100/200, or similar VAPORESSO setup, these are the coils that keep your clouds consistent and your flavor sharp.

Each coil uses a press‑fit install for quick, tool‑free swaps and is tuned for steady wicking at the wattages DTL users actually vape—so fewer dry hits and less fuss. Choose 0.15Ω for warm, high‑power DL, 0.2Ω for a punchy, mid‑high draw, or 0.4Ω for a smoother, slightly cooler cloud that sips less power. Robust O‑ring sealing helps minimize leaks when the coil is seated correctly, and the wide bore keeps airflow smooth for a comfortable inhale.

Whether you’re replacing a tired coil or stocking up for a week of heavy use, GTi Mesh gives you reliable DTL performance with the convenience and value of a 5‑pack.

Technical Specifications

• Brand: VAPORESSO
• Product Type: Replacement mesh coils (press‑fit)
• Compatible Tanks/Devices: iTank / iTank 2 / iTank X; GEN 80S/200 (iTank editions), Target 80/100/200 kits (and other VAPORESSO mods with iTank)
• Available Resistances (typical):
  • GTi 0.15Ω Mesh: 75–90W (warm, dense DL)
  • GTi 0.2Ω Mesh: 60–75W (balanced/warm DL)
  • GTi 0.4Ω Mesh: 50–60W (smooth/cooler DL)
• Wicking: Optimized cotton blend for high‑VG freebase e‑liquids
• Installation: Press‑fit (ensure firm seating)
• Pack Size: 5 coils per pack (availability may vary by resistance)

VAPORESSO GTi Replacement Coils — Variants

Pick the resistance that matches your preferred warmth, vapor output, and e‑liquid.

• GTi 0.15Ω Mesh (75–90W, DL): Maximum warmth and vapor density; best with 70/30 freebase.
• GTi 0.2Ω Mesh (60–75W, DL): Punchy, balanced draw; also loves 70/30 freebase.
• GTi 0.4Ω Mesh (50–60W, DL/RDL): Smoother, slightly cooler cloud with great flavor and battery economy (60/40–70/30).

Key Selling Points

• Mesh flavor clarity with fast ramp‑up for vivid top notes
• Three resistances to fine‑tune warmth and cloud density
• Press‑fit install with strong O‑rings to help reduce leaks
• Optimized for high‑VG freebase in the 50–90W range
• Built for iTank/iTank 2 and VAPORESSO DL setups (GEN/Target kits)
• Consistent coil life when used within rated power and primed correctly
• Value 5‑pack keeps you stocked for routine maintenance

Optional Subsections:

• Performance & Longevity: Even heating and tuned wicking maintain flavor through multiple refills.
• Clean Handling: Press‑fit design and robust seals simplify coil swaps and daily carry.

Why Choose VAPORESSO GTi Replacement Coils?

GTi Mesh coils are engineered for hassle‑free DTL performance: big flavor, stable wattage behavior, and quick, clean installs. The mesh geometry spreads heat evenly to preserve delicate fruit accents while still driving dense vapor for dessert and tobacco blends. With resistances from 0.15Ω to 0.4Ω, you can dial in your exact preference—hot and heavy or smooth and efficient—without changing tanks.

• Convenience: Press‑fit coils swap in seconds; clear wattage ranges remove guesswork.
• Flavor Variety: Mesh extraction keeps fruits, mints, and creams bright and layered at realistic DL wattages.
• Cost‑Effectiveness: Replacing coils in a reusable tank costs far less over time than disposables.
• Eco‑Friendly: Reusable hardware + bottled liquid reduces single‑use waste.
• Compatibility: Purpose‑built for the iTank family on GEN/Target DL kits.

If your clouds feel muted or your tank needs a refresh, GTi Mesh gets your setup back to warm, saturated, and consistent—fast.

Pros:

1. Fast‑ramping mesh for crisp flavor and dense clouds
2. Three practical resistances for DL tuning (50–90W)
3. Press‑fit install and strong O‑ring sealing
4. Optimized for high‑VG freebase; great coil life within range
5. 5‑pack value for regular maintenance

VAPORESSO GTi Coils vs. VOOPOO PnP X Mesh Coils

How to Use VAPORESSO GTi Replacement Coils

• Remove the tank base and pull the used coil straight out.
• Press‑fit a new GTi coil firmly into the base—fully seat the O‑rings.
• Fill the tank and let it sit 5–10 minutes to prime.
• Start at the low end of the coil’s wattage; increase gradually to taste.
• Keep the tank above one‑third full and replace the coil when flavor fades or tastes burnt.

Safety & Quality Assurance at Vape Collection shop

• Genuine VAPORESSO coils sourced from authorized distributors.
• Follow your tank/mod manual for power limits, priming, and routine cleaning.

Why Vape Collection shop Is UAE’s #1 Destination

• Extensive range of VAPORESSO tanks, coils, and compatible mods
• Authenticity guaranteed on every item
• Fast, reliable shipping across the UAE

Tips for Vaping in UAE

• Use authorized retailers and vape in permitted areas.
• Match coil to liquid: 70/30 freebase excels on 0.15–0.2Ω at higher watt; 60/40–70/30 suits 0.4Ω for cooler draws.
• Prime new coils thoroughly and avoid chain vaping right after refills.
• Wipe 510 contacts weekly; don’t leave a full tank in a hot car.
• Rotate flavors to avoid palate fatigue and change coils promptly when performance drops.

Why Buy from Vape Collection shop?

• 100% Authentic Products
• Fast Delivery
• Best Prices & Discounts
• 24/7 Customer Support

Fast Delivery All Over UAE – Covering Every Corner of Dubai
We proudly deliver across the UAE: Dubai, Abu Dhabi, Sharjah, Ajman, Fujairah, Ras Al Khaimah, and Umm Al Quwain.

In Dubai, we cover all major areas, including:
Downtown, Business Bay, Dubai Marina, Jumeirah, Palm Jumeirah, Deira, Bur Dubai, Al Barsha, JVC, JLT, Silicon Oasis, International City, Mirdif, Arabian Ranches, Motor City, Sports City, Al Quoz, Al Nahda, Karama, Satwa, Discovery Gardens, Dubai Festival City, Dubai Hills, Meydan, DIP, Dubai Creek Harbour, and more.

FAQs

1. Which tanks do GTi coils fit?
   VAPORESSO iTank / iTank 2 / iTank X and kits that ship with these tanks (e.g., GEN 80S/200 iTank editions, Target 80/100/200).
2. Which resistance should I choose?
   0.15Ω for hottest/densest DL (75–90W), 0.2Ω for warm/balanced DL (60–75W), 0.4Ω for smoother DL (50–60W).
3. What liquids work best?
   High‑VG freebase (60/40–70/30). Very thin 50/50 may seep in DL tanks.
4. How long does a coil last?
   Several days to a couple of weeks depending on wattage, sweetness, and usage.
5. Do they leak?
   Properly seated O‑rings and correct usage minimize leaks; avoid extreme heat and over‑thin liquids.
6. Do I need to prime new coils?
   Yes—fill the tank and let it sit 5–10 minutes before first use.
7. Can I use nic salts?
   GTi coils are intended for freebase DL vaping at higher wattages, not high‑strength salts.
8. What wattage should I start at?
   Begin at the coil’s low end (e.g., 50W on 0.4Ω) and step up slowly.
9. Are these genuine coils?
   We source directly from authorized VAPORESSO channels.
10. How many coils per pack?
    Typically 5 per pack (varies by resistance/packaging).

Final Thoughts

VAPORESSO GTi Replacement Coils bring fast‑ramping mesh flavor, dense vapor, and reliable coil life to your iTank setup—ideal for true DL vaping without the fuss. Choose 0.15Ω, 0.2Ω, or 0.4Ω to match your warmth and wattage, press‑fit, prime, and enjoy a clean, consistent draw. Whether you’re in Dubai or elsewhere in the UAE, order from Vape Collection shop for authentic coils, fast delivery, and sharp pricing. Stock up on GTi Mesh today and enjoy free shipping.